Termination Y Splice TermY SCIL8M to MCIL3F and RMG3F Signal Distribution
Keywords： TERM-Y,commercial diving connector,specialist diving connector,IMCA D035,commercial diving connector underwater 300m IMCA D035
- IP68 waterproof
- Up to 7000m
- In-line, 1Pin, Male
- RV POWER GROUP
- [email protected]
-
- Description
- Video
- Downloads
The TERM-Y is a Y-splice termination assembly that converts one SCIL8M (8-pin male in-line) connector into a MCIL3F (3-pin female) and an RMG-3-FS (3-pin female socket) output. Used in commercial diving spreads to distribute a single umbilical signal circuit to two downstream devices simultaneously - for example, splitting the topside signal to both a diver hat receiver and a video system.
Key Design Features
- Y-Splice Architecture: One SCIL8M input to MCIL3F + RMG-3-FS outputs.
- Eliminates Daisy-Chaining: Both outputs active simultaneously - no signal sharing penalty.
- Rated to 300 m: Full commercial diving depth coverage.
- Rubber-Protected Junctions: All Y-junction points over-moulded for seawater protection.
- IMCA Compliant
- Available as Factory Assembly: Pre-tested and documented by RV Power Group.
Typical Applications
- Commercial diving spread signal distribution from topside control to hat + video
- Bell diving comms and monitoring signal distribution
- Y-split of SCIL8M umbilical signal to dual RMG-3-FS outputs on diving spread
- Saturation system signal distribution at bell panel
Frequently Asked Questions
Q: What are the connector types on the TERM-Y?
A: Input: SCIL8M (8-pin male in-line). Outputs: MCIL3F (3-pin female) + RMG-3-FS (3-pin female socket).
Q: Can I get a custom Y-splice with different connector types?
A: Yes - OEM Y-splices available. Contact [email protected] with your connector types and circuit requirement.
Q: Depth rating?
A: 300 m (30 Bar).
Q: What signals are distributed?
A: Typical use is diver comms and video - contact [email protected] for circuit details.
Q: Is the TERM-Y a standard stock item?
A: Semi-custom - short lead time. Contact [email protected] for availability and lead time.
Q: Can both outputs carry the same signal simultaneously?
A: Yes - Y-splice architecture distributes signal to both outputs simultaneously.
Q: IMCA compliant?
A: Yes - IMCA D 035.
Q: Cable length options?
A: Custom lengths available. Contact [email protected] with your spread layout.
Q: Factory tested?
A: Yes - every assembly tested before shipment.
Contact [email protected] for TERM-Y pricing, availability, and custom Y-splice configurations.