EO Cable Wet Electro-Optical Connector EO Cord Diver Video and Comms
Keywords： EO-CABLE,commercial diving connector,specialist diving connector,IMCA D035,commercial diving connector underwater 300m IMCA D035
- IP68 waterproof
- Up to 7000m
- In-line, 1Pin, Male
- RV POWER GROUP
- [email protected]
-
- Description
- Video
- Downloads
RV Power Group supplies electro-optical (E/O) cable assemblies with wet-mate E/O connectors for commercial diving, ROV, and subsea inspection applications requiring simultaneous electrical power/signal and optical fibre transmission through a single hybrid cable and wet-mate connector. E/O cable assemblies are available with RMG/RMK-compatible hybrid housings or standalone wet E/O connector interfaces.
Electro-Optical Cable and Connector Capabilities
- Hybrid E/O Cable: Integrated optical fibre(s) + copper conductors in single cable.
- Wet-Mate E/O Connectors: Mate and de-mate in full seawater immersion at rated depth.
- 300 m Standard / Deeper Custom Ratings Available
- Custom Fibre Counts: 1, 2, 4, 8 or more optical fibres per assembly.
- SM and MM Fibre Options: Single-mode (SM/9/125) or multi-mode (MM/62.5/125) fibres.
- Multiple Connector Interface Options: ST, LC, FC, SC and custom subsea-rated interfaces.
- Matched RMG/RMK Electrical Circuits: Hybrid E/O assembly that combines RMG/RMK copper contacts with E/O optical section in one connector body.
- Factory Tested: OTDR fibre test and pressure test with documentation before shipment.
Typical Applications
- Commercial diver video and high-bandwidth comms via fibre optic umbilical
- ROV and AUV E/O umbilical tether assemblies
- Subsea inspection camera and sensor E/O cable assemblies
- Topside control to subsea equipment high-bandwidth data links
- Bell diving E/O cable assemblies for HD video transmission
Frequently Asked Questions
Q: What fibre types are available?
A: Single-mode (9/125 um) and multi-mode (62.5/125 um or 50/125 um). Specify SM or MM when ordering.
Q: What wet-mate connector standards are available?
A: SubConn-compatible, SEACON-compatible, and RV Power Group proprietary designs. Contact [email protected].
Q: Depth rating for E/O assemblies?
A: Standard 300 m; deeper custom ratings on request.
Q: Can I get a hybrid E/O+copper assembly in one connector body?
A: Yes - custom hybrid E/O + RMG/RMK copper contacts available. Contact [email protected].
Q: What is the minimum order quantity?
A: Prototype single assemblies available. Contact [email protected] for your requirement.
Q: Are OTDR test reports provided?
A: Yes - OTDR fibre insertion loss test and pressure test reports with every E/O assembly.
Q: Can you supply E/O assemblies for diver helmet video?
A: Yes - fibre optic hat cable assemblies for HD video from diver to topside.
Q: Lead time for E/O cable assemblies?
A: Typically 4-8 weeks depending on fibre count, length, and connector type. Contact [email protected].
Q: Do you supply bare E/O cable without connectors?
A: Yes - hybrid E/O cable supplied on reels or cut to length. Contact [email protected].
Contact [email protected] with your E/O cable and connector requirement including fibre count, copper conductors, depth rating, length, and application.